As you probably know, we love LED lights around here. They are versatile, economic, and easy to use… so what’s there not to like? As they increase in popularity people have found new and unique ways to use them, but there is always the question of, how do you put LED lights up. Because there are so many uses for them and different ways/places to mount them. If you’re thinking of switching to LED lights, read on for the easiest way to put them up and some other info that can help you with your lights and projects.
What do you need to put LED lights up?
We all know the excitement that comes with starting a new project, but we also know the frustration of being mid-project and needing to run out to get materials you forgot to get before you started. So let’s take a look at the things that you will probably need for putting your LED lights up. For most projects, you will obviously need your LED lights, a drill, screws, and wire cutters. Start by positioning the LED lights where you want them to be, then secure them using screws and your drill. Next, take out your wire cutters and carefully snip off any excess lengths of wire from the LEDs.
Once all of the excess length has been removed and everything is in the right place, plug in the wiring to your power source and check to make sure that the lights are all working as you want them to. You don’t want them to be in the perfect spot but be burnt out , right?
If a light does not come on or another issue is present double check your connections are sound and check any wiring for frayed or exposed areas that may need additional insulation or repair.
Choose where you want to put your LED lights
When considering where to install LED lighting, the primary factor to consider is how the light is going to be spread out. LEDS do have a bit more of a direct lighting pattern so they don’t diffuse by themselves. This is a huge factor to keep in mind when positioning your lights.
Before you start you should also make sure that your work area is clean and that there’s nothing you will trip on, as we know there are usually a lot of wires around LED setups.
Also, you’ll want to think about being able to access your lighting setup later on if it needs repair or replacement. When choosing a spot for putting up your LED lights, you will want to insure that if ( for some reason) you have to change them you can easily get to them. LEDs should last a long time, but before you put them in a permanent position you will want to make sure that you can change them if you need to.
Drill holes into the chosen spot for your LED lights
When you’re planning your outdoor LED lighting project, one of the biggest decisions that needs to be made, the earlier the better we find, is where you will place the lights. Once you have chosen your spot, it is important to drill holes into the material where the fixtures will go. Make sure that the holes are large enough so the light wires can pass through easily, or the hooks you are using will fit in snugly.
The tighter the holes the better you will be able to help protect them from being damaged by objects that could become lodged in the lines, or wear down the wires. You should be careful when drilling not to damage any other wiring, pipes, or fixtures in the area. After measuring and drilling the holes, ensure that all wires are correctly placed so you can connect them and get the light pattern you wantInsert the wires of the LED lights into the holes and screw them in place
Working with LED lights often requires a little skill and patience but it can be well worth the effort. The first step after gathering supplies is to insert the wires of the LED lights into the designated holes in the light fixture and then screw them tightly in place. After securing all of the lights, double-check that each has been fastened properly.
Once installation is complete, switch on the power and make sure all the lights are turning on and functioning how you want them to. With a few simple steps and a little time, homeowners can easily upgrade their lighting fixtures with modern LED options, providing both convenience and cost savings in one go. So really, we are waiting for someone to give us a reason why you haven’t swapped your old lights out to new leds?!
Cut off any excess wire with your wire cutters
Working with wire can be a tricky business. It’s important to handle the material properly and to make sure that you have the right tool for the job—in this case, a pair of quality wire cutters. Depending on the type of craft you are engaging in and the purpose of the wire, there may be an excess piece that needs to be cut off; without wire cutters you will have to use a knife or something else. Not saying it’s impossible, it just isn’t as easy or safe. ( and we like those two aspects of jobs!)
A good set of wire cutters should be able to handle any workload thrown its way effortlessly, so make sure you are getting a good quality pair instead of just buying the cheapest one. Keeping your wires organized requires paying attention to detail—and using a reliable set of wire cutters will go a long way toward helping you get your project done quickly.
Conclusion
Alright, your LED project is done… your holes have been drilled and wires ran. You’ve already checked that all the bulbs work right and they flash ( if that’s your thing) and you’ve plugged them in. What else is there to do other than sit back and enjoy your hard work and completed project!
Frequently Asked Questions
What is the easiest way to put up LED lights?
LED lights are very easy to install. You just need to find a spot where the light will go and then drill some holes into the wall. After that, put the LED light wires into the holes and screw them in place. Turn on your new LED light and enjoy!
Or you can take advtange of the lightweight aspect of LED lights and simply use double sided tapes.
What are some tips for putting up LED lights?
There are a few things to keep in mind when installing LED lights: first, ensure that the spot you think about the light diffusion so your light coverage is what you need for your project.. You also want to be sure to drill holes into the wall before inserting the wires of the LED light. Lastly, cut off any excess wire with your wire cutters. By following these simple tips, you can ensure that your LED installation goes as smoothly as possible.
How do I choose the right LED lights for my home?
When choosing LED lights for your home, it is important to consider a few factors. First, you must decide what type of LED light bulb you want: A19, BR30, PAR16, or MR16. Additionally, you need to consider the wattage of the LED bulb and what type of fixture it will be going in. Once you have determined these things, you can then select the right LED light for your needs.
How do I know if LED lights are right for me?
LED lights are a great choice for homeowners because they are both cost- and energy-efficient. Additionally, LED lights last much longer than other types of light bulbs, making them a wise investment. If you’re looking to save on your energy bill and want lights that will last for years, then LED lights are the right choice for you.
What are the benefits of LED lights?
LED lights are a great choice for homeowners because they are both cost- and energy-efficient. Additionally, LED lights last much longer than other types of light bulbs, making them a wise investment. If you’re looking to save on your energy bill and want lights that will last for years, then LED lights are the right choice for you.
Additionally, LED bulbs can improve the feel of any room and add a modern feel to your décor. Simply put, LED lights are both cost- and energy-efficient, making them a great choice for homeowners.
How do I save money with LED lights?
The best way to save money with LED lights is by choosing the right type of light bulb. LED bulbs come in various wattages, so it is important to select the right one for your needs. Additionally, LED lights last much longer than other light bulbs, making them a good long term investment. By following these simple tips, you can ensure that you get the most out of your LED lights and save money.
How can I get started with LED lights?
To start using LED lights, you need to figure out what type of LED light you need. LED light bulbs come in different shapes and sizes, so you should find the right one for your needs. You also need to know how many watts the LED bulb has.
Once you have that information, find a spot in your house where you want the light and drill some holes into the wall. Put the LED light wires into the holes and screw them in place. Turn on your new LED light and enjoy!
